P3827 DTC For Packard 120
Packard 120 Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Turbocharged Engine |
Your Packard 120 engine control system detects a problem, the computer stores the diagnostic trouble
code P3827 in its memory.
To figure out what is wrong with your vehicle you must first extract the P3827 DTC For Packard 120.
A good ground connection is also extremely important. P3827 Packard 120 engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
P3827 Packard 120 DTC Meaning
P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
3 |
SAE - Generic |
8 |
Accelerator Pedal Position (APP) Sensor 1 Performance |
2 |
Cruise Control Servo Indicates Low |
7 |
Cruise Control System - Vehicle Accel Too High |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P3827 Packard 120 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Packard car models :
The listed Packard models will give information about P3827 DTC.
|