P3839 DTC For Packard 300
Packard 300 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Packard 300 engine control system detects a problem, the computer stores the diagnostic trouble
code P3839 in its memory.
To figure out what is wrong with your vehicle you must first extract the P3839 DTC For Packard 300.
On 1999 and later P3839 Packard 300 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
P3839 Packard 300 DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 3 |
SAE - Generic |
| 8 |
Accelerator Pedal Position (APP) Sensor 1 Performance |
| 3 |
Low Coolant Circuit |
| 9 |
A/C System High Pressure High Temperature |
When you turn on the ignition, the Service Engine Soon or Check Engine P3839 Packard 300 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If P3839 DTC For Packard 300 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the P3839!
You can also check other Packard car models :
|
The listed Packard models will give information about P3839 DTC.
|
