P3841 DTC For Packard 400
Packard 400 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | V-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Packard 400 engine control system detects a problem, the computer stores the diagnostic trouble
code P3841 in its memory.
To figure out what is wrong with your vehicle you must first extract the P3841 DTC For Packard 400.
A good ground connection is also extremely important. P3841 Packard 400 engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
P3841 Packard 400 DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 3 |
SAE - Generic |
| 8 |
Accelerator Pedal Position (APP) Sensor 1 Performance |
| 4 |
Control Module Throttle Actuator Position Performance |
| 1 |
PCM Stack Overrun |
The original multi-displacement system turned off opposite pairs of cylinders, allowing the engine to have three different configurations and displacements. P3841 Packard 400 code had an elaborate diagnostics procedure, including showing engine trouble codes on the air conditionning display. However, the system was troublesome, misunderstood by customers, and a rash of unpredictable failures led to the technology being quickly retired.
You can also check other Packard car models :
|
The listed Packard models will give information about P3841 DTC.
|
