P3863 DTC For Peugeot 5008
Peugeot 5008 Engine Specifications:
Engine Type : | Single Cylinder Engine |
Cylinder Type : | Opposed Cylinder Engine |
Engine Air Intake Process : | Naturally Aspirated |
Your Peugeot 5008 engine control system detects a problem, the computer stores the diagnostic trouble
code P3863 in its memory.
To figure out what is wrong with your vehicle you must first extract the P3863 DTC For Peugeot 5008.
To solve P3863 Peugeot 5008 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
P3863 Peugeot 5008 DTC Meaning
P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
3 |
SAE - Generic |
8 |
Accelerator Pedal Position (APP) Sensor 1 Performance |
6 |
Vehicle Speed Output Circuit |
3 |
TFP Valve Position Switch-Drive Without Drive Ratio |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the P3863 Peugeot 5008 code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Peugeot car models :
The listed Peugeot models will give information about P3863 DTC.
|