P3885 DTC For Jensen Healey
Jensen Healey Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Jensen Healey engine control system detects a problem, the computer stores the diagnostic trouble
code P3885 in its memory.
To figure out what is wrong with your vehicle you must first extract the P3885 DTC For Jensen Healey.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check P3885 Jensen Healey that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
P3885 Jensen Healey DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 3 |
SAE - Generic |
| 8 |
Accelerator Pedal Position (APP) Sensor 1 Performance |
| 8 |
Crankshaft Position Sensor Circuit Performance |
| 5 |
Cruise Inhibit Control Circuit |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P3885 Jensen Healey code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Jensen car models :
|
The listed Jensen models will give information about P3885 DTC.
|
