P3887 DTC For Ginetta G20
Ginetta G20 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Ginetta G20 engine control system detects a problem, the computer stores the diagnostic trouble
code P3887 in its memory.
To figure out what is wrong with your vehicle you must first extract the P3887 DTC For Ginetta G20.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check P3887 Ginetta G20 that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
P3887 Ginetta G20 DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 3 |
SAE - Generic |
| 8 |
Accelerator Pedal Position (APP) Sensor 1 Performance |
| 8 |
Crankshaft Position Sensor Circuit Performance |
| 7 |
Cruise Control System - Vehicle Accel Too High |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P3887 Ginetta G20 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Ginetta car models :
|
The listed Ginetta models will give information about P3887 DTC.
|
