U0748 DTC For Mg Rv10
Mg Rv10 Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Mg Rv10 engine control system detects a problem, the computer stores the diagnostic trouble
code U0748 in its memory.
To figure out what is wrong with your vehicle you must first extract the U0748 DTC For Mg Rv10.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check U0748 Mg Rv10 that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
U0748 Mg Rv10 DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 0 |
SAE - Generic |
| 7 |
Ignition System Or Misfire |
| 4 |
Control Module Throttle Actuator Position Performance |
| 8 |
Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the U0748 Mg Rv10 code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Mg car models :
|
The listed Mg models will give information about U0748 DTC.
|
