U0930 DTC For Bmw Serie 2 Active Tourer
Bmw Serie 2 Active Tourer Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Bmw Serie 2 Active Tourer engine control system detects a problem, the computer stores the diagnostic trouble
code U0930 in its memory.
To figure out what is wrong with your vehicle you must first extract the U0930 DTC For Bmw Serie 2 Active Tourer.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check U0930 Bmw Serie 2 Active Tourer that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
U0930 Bmw Serie 2 Active Tourer DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 0 |
SAE - Generic |
| 9 |
Transmission |
| 3 |
Low Coolant Circuit |
| 0 |
Transmission Engaged At High Throttle Angle |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U0930 Bmw Serie 2 Active Tourer code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Bmw car models :
|
The listed Bmw models will give information about U0930 DTC.
|
