U1040 DTC For Ford Mustang 4
Ford Mustang 4 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Ford Mustang 4 engine control system detects a problem, the computer stores the diagnostic trouble
code U1040 in its memory.
To figure out what is wrong with your vehicle you must first extract the U1040 DTC For Ford Mustang 4.
On 1999 and later U1040 Ford Mustang 4 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
U1040 Ford Mustang 4 DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 1 |
MFG - Manufacturer Specific |
| 0 |
Transmission |
| 4 |
Control Module Throttle Actuator Position Performance |
| 0 |
Transmission Engaged At High Throttle Angle |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U1040 Ford Mustang 4 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Ford car models :
|
The listed Ford models will give information about U1040 DTC.
|
