U1046 DTC For Sunbeam Talbot 4 Litre
Sunbeam Talbot 4 Litre Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Supercharged Engine |
Your Sunbeam Talbot 4 Litre engine control system detects a problem, the computer stores the diagnostic trouble
code U1046 in its memory.
To figure out what is wrong with your vehicle you must first extract the U1046 DTC For Sunbeam Talbot 4 Litre.
On 1999 and later U1046 Sunbeam Talbot 4 Litre engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
U1046 Sunbeam Talbot 4 Litre DTC Meaning
U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
1 |
MFG - Manufacturer Specific |
0 |
Transmission |
4 |
Control Module Throttle Actuator Position Performance |
6 |
Transmission Control Module Reprogrammable Memory |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U1046 Sunbeam Talbot 4 Litre code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Sunbeam car models :
The listed Sunbeam models will give information about U1046 DTC.
|