U1206 DTC For Lexus Ls 300
Lexus Ls 300 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Lexus Ls 300 engine control system detects a problem, the computer stores the diagnostic trouble
code U1206 in its memory.
To figure out what is wrong with your vehicle you must first extract the U1206 DTC For Lexus Ls 300.
Another consequence of U1206 Lexus Ls 300 engine overheating may be a blown head gasket. Heat makes aluminum swell almost three times faster than cast iron. Thermal stress can distort the head and make it swell in areas that are hottest like those between exhaust valves in adjoining cylinders, and areas that have restricted coolant flow like the narrow area that separates the cylinders. The typical aluminum head swells most in the middle, which can crush the head gasket if the head gets too hot. This will usually cause the head gasket to leak compression between adjacent cylinders, or leak coolant into the cylinders.
U1206 Lexus Ls 300 DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 1 |
MFG - Manufacturer Specific |
| 2 |
Computer And Auxiliary Outputs |
| 0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
| 6 |
Transmission Control Module Reprogrammable Memory |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U1206 Lexus Ls 300 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Lexus car models :
|
The listed Lexus models will give information about U1206 DTC.
|
