U1248 DTC For Morgan F Super
Morgan F Super Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | V-Type Engine |
Engine Air Intake Process : | Naturally Aspirated |
Your Morgan F Super engine control system detects a problem, the computer stores the diagnostic trouble
code U1248 in its memory.
To figure out what is wrong with your vehicle you must first extract the U1248 DTC For Morgan F Super.
A good ground connection is also extremely important. U1248 Morgan F Super engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
U1248 Morgan F Super DTC Meaning
U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
1 |
MFG - Manufacturer Specific |
2 |
Computer And Auxiliary Outputs |
4 |
Control Module Throttle Actuator Position Performance |
8 |
Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit |
The original multi-displacement system turned off opposite pairs of cylinders, allowing the engine to have three different configurations and displacements. U1248 Morgan F Super code had an elaborate diagnostics procedure, including showing engine trouble codes on the air conditionning display. However, the system was troublesome, misunderstood by customers, and a rash of unpredictable failures led to the technology being quickly retired.
You can also check other Morgan car models :
The listed Morgan models will give information about U1248 DTC.
|