U1305 DTC For Mercury Mountaineer Iii
Mercury Mountaineer Iii Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Mercury Mountaineer Iii engine control system detects a problem, the computer stores the diagnostic trouble
code U1305 in its memory.
To figure out what is wrong with your vehicle you must first extract the U1305 DTC For Mercury Mountaineer Iii.
To solve U1305 Mercury Mountaineer Iii problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
U1305 Mercury Mountaineer Iii DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 1 |
MFG - Manufacturer Specific |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
| 5 |
Cruise Inhibit Control Circuit |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U1305 Mercury Mountaineer Iii code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Mercury car models :
|
The listed Mercury models will give information about U1305 DTC.
|
