U1414 DTC For Mercedes Clk 500
Mercedes Clk 500 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Mercedes Clk 500 engine control system detects a problem, the computer stores the diagnostic trouble
code U1414 in its memory.
To figure out what is wrong with your vehicle you must first extract the U1414 DTC For Mercedes Clk 500.
A good ground connection is also extremely important. U1414 Mercedes Clk 500 engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
U1414 Mercedes Clk 500 DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 1 |
MFG - Manufacturer Specific |
| 4 |
Fuel And Air Metering (Injector Circuit Malfunctions Only) |
| 1 |
IC Circuit High Voltage |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
When you turn on the ignition, the Service Engine Soon or Check Engine U1414 Mercedes Clk 500 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If U1414 DTC For Mercedes Clk 500 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the U1414!
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about U1414 DTC.
|
