U1437 DTC For Opel Signum
Opel Signum Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Opel Signum engine control system detects a problem, the computer stores the diagnostic trouble
code U1437 in its memory.
To figure out what is wrong with your vehicle you must first extract the U1437 DTC For Opel Signum.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check U1437 Opel Signum that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
U1437 Opel Signum DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 1 |
MFG - Manufacturer Specific |
| 4 |
Fuel And Air Metering (Injector Circuit Malfunctions Only) |
| 3 |
Low Coolant Circuit |
| 7 |
Cruise Control System - Vehicle Accel Too High |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U1437 Opel Signum code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Opel car models :
|
The listed Opel models will give information about U1437 DTC.
|
