U150B DTC For Opel Vectra B
Opel Vectra B Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Opel Vectra B engine control system detects a problem, the computer stores the diagnostic trouble
code U150B in its memory.
To figure out what is wrong with your vehicle you must first extract the U150B DTC For Opel Vectra B.
On 1999 and later U150B Opel Vectra B engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
U150B Opel Vectra B DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 1 |
MFG - Manufacturer Specific |
| 5 |
Auxiliary Emission Controls |
| 0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
| B |
TFP Valve Position Switch-Drive Without Drive Ratio |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U150B Opel Vectra B code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Opel car models :
|
The listed Opel models will give information about U150B DTC.
|
