U1706 DTC For Mercury Lynx
Mercury Lynx Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Naturally Aspirated |
Your Mercury Lynx engine control system detects a problem, the computer stores the diagnostic trouble
code U1706 in its memory.
To figure out what is wrong with your vehicle you must first extract the U1706 DTC For Mercury Lynx.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check U1706 Mercury Lynx that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
U1706 Mercury Lynx DTC Meaning
U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
1 |
MFG - Manufacturer Specific |
7 |
Ignition System Or Misfire |
0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
6 |
Transmission Control Module Reprogrammable Memory |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U1706 Mercury Lynx code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Mercury car models :
The listed Mercury models will give information about U1706 DTC.
|