U20EF DTC For Lamborghini Gallardo Lp560
Lamborghini Gallardo Lp560 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Lamborghini Gallardo Lp560 engine control system detects a problem, the computer stores the diagnostic trouble
code U20EF in its memory.
To figure out what is wrong with your vehicle you must first extract the U20EF DTC For Lamborghini Gallardo Lp560.
On 1999 and later U20EF Lamborghini Gallardo Lp560 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
U20EF Lamborghini Gallardo Lp560 DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 2 |
MFG - Manufacturer Specific |
| 0 |
Transmission |
| E |
BBV Sensor Circuit Low Voltage |
| F |
TFP Valve Position Switch-Drive Without Drive Ratio |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U20EF Lamborghini Gallardo Lp560 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Lamborghini car models :
|
The listed Lamborghini models will give information about U20EF DTC.
|
