U20F7 DTC For Isuzu Vehicross
Isuzu Vehicross Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | V-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Isuzu Vehicross engine control system detects a problem, the computer stores the diagnostic trouble
code U20F7 in its memory.
To figure out what is wrong with your vehicle you must first extract the U20F7 DTC For Isuzu Vehicross.
On 1999 and later U20F7 Isuzu Vehicross engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
U20F7 Isuzu Vehicross DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 2 |
MFG - Manufacturer Specific |
| 0 |
Transmission |
| F |
BBV Sensor Circuit Low Voltage |
| 7 |
Cruise Control System - Vehicle Accel Too High |
The original multi-displacement system turned off opposite pairs of cylinders, allowing the engine to have three different configurations and displacements. U20F7 Isuzu Vehicross code had an elaborate diagnostics procedure, including showing engine trouble codes on the air conditionning display. However, the system was troublesome, misunderstood by customers, and a rash of unpredictable failures led to the technology being quickly retired.
You can also check other Isuzu car models :
|
The listed Isuzu models will give information about U20F7 DTC.
|
