U2106 DTC For Isuzu Unicab
Isuzu Unicab Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Supercharged Engine |
Your Isuzu Unicab engine control system detects a problem, the computer stores the diagnostic trouble
code U2106 in its memory.
To figure out what is wrong with your vehicle you must first extract the U2106 DTC For Isuzu Unicab.
To solve U2106 Isuzu Unicab problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
U2106 Isuzu Unicab DTC Meaning
U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
2 |
MFG - Manufacturer Specific |
1 |
Fuel And Air Metering |
0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
6 |
Transmission Control Module Reprogrammable Memory |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U2106 Isuzu Unicab code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Isuzu car models :
The listed Isuzu models will give information about U2106 DTC.
|