U2116 DTC For Isuzu Bellet
Isuzu Bellet Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Isuzu Bellet engine control system detects a problem, the computer stores the diagnostic trouble
code U2116 in its memory.
To figure out what is wrong with your vehicle you must first extract the U2116 DTC For Isuzu Bellet.
On 1999 and later U2116 Isuzu Bellet engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
U2116 Isuzu Bellet DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 2 |
MFG - Manufacturer Specific |
| 1 |
Fuel And Air Metering |
| 1 |
IC Circuit High Voltage |
| 6 |
Transmission Control Module Reprogrammable Memory |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U2116 Isuzu Bellet code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Isuzu car models :
|
The listed Isuzu models will give information about U2116 DTC.
|
