U2306 DTC For Ferrari Dino
Ferrari Dino Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Naturally Aspirated |
Your Ferrari Dino engine control system detects a problem, the computer stores the diagnostic trouble
code U2306 in its memory.
To figure out what is wrong with your vehicle you must first extract the U2306 DTC For Ferrari Dino.
U2306 Ferrari Dino engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
U2306 Ferrari Dino DTC Meaning
U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
2 |
MFG - Manufacturer Specific |
3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
6 |
Transmission Control Module Reprogrammable Memory |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U2306 Ferrari Dino code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Ferrari car models :
The listed Ferrari models will give information about U2306 DTC.
|