U260F DTC For Talbot 14
Talbot 14 Engine Specifications:
Engine Type : | Single Cylinder Engine |
Cylinder Type : | Opposed Cylinder Engine |
Engine Air Intake Process : | Naturally Aspirated |
Your Talbot 14 engine control system detects a problem, the computer stores the diagnostic trouble
code U260F in its memory.
To figure out what is wrong with your vehicle you must first extract the U260F DTC For Talbot 14.
On 1999 and later U260F Talbot 14 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
U260F Talbot 14 DTC Meaning
U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
2 |
MFG - Manufacturer Specific |
6 |
Vehicle Speed Control And Idle Control System |
0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
F |
TFP Valve Position Switch-Drive Without Drive Ratio |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the U260F Talbot 14 code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Talbot car models :
The listed Talbot models will give information about U260F DTC.
|