U2958 DTC For Audi Variant
Audi Variant Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | Opposed Cylinder Engine |
Engine Air Intake Process : | Supercharged Engine |
Your Audi Variant engine control system detects a problem, the computer stores the diagnostic trouble
code U2958 in its memory.
To figure out what is wrong with your vehicle you must first extract the U2958 DTC For Audi Variant.
A good ground connection is also extremely important. U2958 Audi Variant engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
U2958 Audi Variant DTC Meaning
U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
2 |
MFG - Manufacturer Specific |
9 |
Transmission |
5 |
BBV Sensor Circuit Low Voltage |
8 |
Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit |
When you turn on the ignition, the Service Engine Soon or Check Engine U2958 Audi Variant light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If U2958 DTC For Audi Variant so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the U2958!
You can also check other Audi car models :
The listed Audi models will give information about U2958 DTC.
|