U2964 DTC For Audi Cabriolet
Audi Cabriolet Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Naturally Aspirated |
Your Audi Cabriolet engine control system detects a problem, the computer stores the diagnostic trouble
code U2964 in its memory.
To figure out what is wrong with your vehicle you must first extract the U2964 DTC For Audi Cabriolet.
U2964 Audi Cabriolet engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
U2964 Audi Cabriolet DTC Meaning
U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
2 |
MFG - Manufacturer Specific |
9 |
Transmission |
6 |
Vehicle Speed Output Circuit |
4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U2964 Audi Cabriolet code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Audi car models :
The listed Audi models will give information about U2964 DTC.
|