U2968 DTC For Audi Concept
Audi Concept Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | Opposed Cylinder Engine |
Engine Air Intake Process : | Turbocharged Engine |
Your Audi Concept engine control system detects a problem, the computer stores the diagnostic trouble
code U2968 in its memory.
To figure out what is wrong with your vehicle you must first extract the U2968 DTC For Audi Concept.
Another consequence of U2968 Audi Concept engine overheating may be a blown head gasket. Heat makes aluminum swell almost three times faster than cast iron. Thermal stress can distort the head and make it swell in areas that are hottest like those between exhaust valves in adjoining cylinders, and areas that have restricted coolant flow like the narrow area that separates the cylinders. The typical aluminum head swells most in the middle, which can crush the head gasket if the head gets too hot. This will usually cause the head gasket to leak compression between adjacent cylinders, or leak coolant into the cylinders.
U2968 Audi Concept DTC Meaning
U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
2 |
MFG - Manufacturer Specific |
9 |
Transmission |
6 |
Vehicle Speed Output Circuit |
8 |
Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit |
When you turn on the ignition, the Service Engine Soon or Check Engine U2968 Audi Concept light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If U2968 DTC For Audi Concept so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the U2968!
You can also check other Audi car models :
The listed Audi models will give information about U2968 DTC.
|