U3714 DTC For Bmw Isetta 600
Bmw Isetta 600 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Bmw Isetta 600 engine control system detects a problem, the computer stores the diagnostic trouble
code U3714 in its memory.
To figure out what is wrong with your vehicle you must first extract the U3714 DTC For Bmw Isetta 600.
To solve U3714 Bmw Isetta 600 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
U3714 Bmw Isetta 600 DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 3 |
SAE - Generic |
| 7 |
Ignition System Or Misfire |
| 1 |
IC Circuit High Voltage |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U3714 Bmw Isetta 600 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Bmw car models :
|
The listed Bmw models will give information about U3714 DTC.
|
