U3748 DTC For Renault 12
Renault 12 Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Naturally Aspirated |
Your Renault 12 engine control system detects a problem, the computer stores the diagnostic trouble
code U3748 in its memory.
To figure out what is wrong with your vehicle you must first extract the U3748 DTC For Renault 12.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check U3748 Renault 12 that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
U3748 Renault 12 DTC Meaning
U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
3 |
SAE - Generic |
7 |
Ignition System Or Misfire |
4 |
Control Module Throttle Actuator Position Performance |
8 |
Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U3748 Renault 12 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Renault car models :
The listed Renault models will give information about U3748 DTC.
|