B0549 DTC For Overland 38
Overland 38 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Overland 38 engine control system detects a problem, the computer stores the diagnostic trouble
code B0549 in its memory.
To figure out what is wrong with your vehicle you must first extract the B0549 DTC For Overland 38.
On 1999 and later B0549 Overland 38 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
B0549 Overland 38 DTC Meaning
| B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
| 0 |
SAE - Generic |
| 5 |
Auxiliary Emission Controls |
| 4 |
Control Module Throttle Actuator Position Performance |
| 9 |
A/C System High Pressure High Temperature |
When you turn on the ignition, the Service Engine Soon or Check Engine B0549 Overland 38 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If B0549 DTC For Overland 38 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the B0549!
You can also check other Overland car models :
|
The listed Overland models will give information about B0549 DTC.
|
