B1237 Honda Pilot DTC Code

Honda Pilot Engine Specifications:

Engine Type :	Multi-Cylinder Engine
Cylinder Type :	W-Type Engine
Engine Air Intake Process :	Supercharged Engine

Your Honda Pilot engine control system detects a problem, the computer stores the diagnostic trouble code B1237 in its memory. To figure out what is wrong with your vehicle you must first extract the B1237 DTC For Honda Pilot.

A good ground connection is also extremely important. B1237 Honda Pilot engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).

B1237 Honda Pilot DTC Meaning

B	Body Code - Problem is antilock brake system, electronic suspension and steering systems.
1	MFG - Manufacturer Specific
2	Computer And Auxiliary Outputs
3	Low Coolant Circuit
7	Cruise Control System - Vehicle Accel Too High

There are currently two main types of cylinder deactivation used today, depending on the type of engine. B1237 Honda Pilot code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.