C0946 DTC For Nissan Qx
Nissan Qx Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Nissan Qx engine control system detects a problem, the computer stores the diagnostic trouble
code C0946 in its memory.
To figure out what is wrong with your vehicle you must first extract the C0946 DTC For Nissan Qx.
C0946 Nissan Qx engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
C0946 Nissan Qx DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 0 |
SAE - Generic |
| 9 |
Transmission |
| 4 |
Control Module Throttle Actuator Position Performance |
| 6 |
Transmission Control Module Reprogrammable Memory |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the C0946 Nissan Qx code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Nissan car models :
|
The listed Nissan models will give information about C0946 DTC.
|
