C1121 DTC For Ford Husky
Ford Husky Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposite Piston Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Ford Husky engine control system detects a problem, the computer stores the diagnostic trouble
code C1121 in its memory.
To figure out what is wrong with your vehicle you must first extract the C1121 DTC For Ford Husky.
To solve C1121 Ford Husky problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
C1121 Ford Husky DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 1 |
MFG - Manufacturer Specific |
| 1 |
Fuel And Air Metering |
| 2 |
Cruise Control Servo Indicates Low |
| 1 |
PCM Stack Overrun |
If your vehicle failed a C1121 Ford Husky test and the C1121 Check Engine Light is NOT on, chances are you have a problem with the OBDII system, a burned out MIL lamp, or a faulty catalytic converter. The converter is essentially an afterburner that cleans up the exhaust after it exits the engine. The OBDII system uses C1121 a ownstream oxygen sensor to monitor the efficiency of the converter, and it should detect a drop in converter efficiency if the converter has been contaminated or is failing (ignition misfiring, leaky exhaust valves, and oil burning can all damage the converter). What you want to look C1121 DTC For Ford Husky: Any conditions that might cause ignition misfire, an overly rich or lean fuel condition, or loss of compression.
You can also check other Ford car models :
|
The listed Ford models will give information about C1121 DTC.
|
