C12FE DTC For Chevrolet Prisma
Chevrolet Prisma Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Chevrolet Prisma engine control system detects a problem, the computer stores the diagnostic trouble
code C12FE in its memory.
To figure out what is wrong with your vehicle you must first extract the C12FE DTC For Chevrolet Prisma.
On 1999 and later C12FE Chevrolet Prisma engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
C12FE Chevrolet Prisma DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 1 |
MFG - Manufacturer Specific |
| 2 |
Computer And Auxiliary Outputs |
| F |
BBV Sensor Circuit Low Voltage |
| E |
TFP Valve Position Switch-Drive Without Drive Ratio |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C12FE Chevrolet Prisma code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Chevrolet car models :
|
The listed Chevrolet models will give information about C12FE DTC.
|
