DF196 DTC For Renault Megane 3
Renault Megane 3 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | V-Type Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Renault Megane 3 engine control system detects a problem, the computer stores the diagnostic trouble
code DF196 in its memory.
To figure out what is wrong with your vehicle you must first extract the DF196 DTC For Renault Megane 3.
A good ground connection is also extremely important. DF196 Renault Megane 3 engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
DF196 Renault Megane 3 DTC Meaning
| D |
Chassis Code - Problem is controller area network wiring bus and modules. |
| F |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 9 |
TP Sensor Learn Not Complete |
| 6 |
Transmission Control Module Reprogrammable Memory |
The original multi-displacement system turned off opposite pairs of cylinders, allowing the engine to have three different configurations and displacements. DF196 Renault Megane 3 code had an elaborate diagnostics procedure, including showing engine trouble codes on the air conditionning display. However, the system was troublesome, misunderstood by customers, and a rash of unpredictable failures led to the technology being quickly retired.
You can also check other Renault car models :
|
The listed Renault models will give information about DF196 DTC.
|
