DF361 DTC For Citroen Jumper Ii
Citroen Jumper Ii Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Citroen Jumper Ii engine control system detects a problem, the computer stores the diagnostic trouble
code DF361 in its memory.
To figure out what is wrong with your vehicle you must first extract the DF361 DTC For Citroen Jumper Ii.
On 1999 and later DF361 Citroen Jumper Ii engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
DF361 Citroen Jumper Ii DTC Meaning
| D |
Chassis Code - Problem is controller area network wiring bus and modules. |
| F |
SAE - Generic |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 6 |
Vehicle Speed Output Circuit |
| 1 |
PCM Stack Overrun |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. DF361 Citroen Jumper Ii code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Citroen car models :
|
The listed Citroen models will give information about DF361 DTC.
|
