P2455 DTC For Mercedes Benz Cls Class
Mercedes Benz Cls Class Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Mercedes Benz Cls Class engine control system detects a problem, the computer stores the diagnostic trouble
code P2455 in its memory.
To figure out what is wrong with your vehicle you must first extract the P2455 DTC For Mercedes Benz Cls Class.
On 1999 and later P2455 Mercedes Benz Cls Class engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
P2455 Mercedes Benz Cls Class DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 2 |
MFG - Manufacturer Specific |
| 4 |
Fuel And Air Metering (Injector Circuit Malfunctions Only) |
| 5 |
BBV Sensor Circuit Low Voltage |
| 5 |
Cruise Inhibit Control Circuit |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P2455 Mercedes Benz Cls Class code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about P2455 DTC.
|
