P314E DTC For Bmw Isetta 600
Bmw Isetta 600 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Bmw Isetta 600 engine control system detects a problem, the computer stores the diagnostic trouble
code P314E in its memory.
To figure out what is wrong with your vehicle you must first extract the P314E DTC For Bmw Isetta 600.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check P314E Bmw Isetta 600 that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
P314E Bmw Isetta 600 DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 3 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 4 |
Control Module Throttle Actuator Position Performance |
| E |
TFP Valve Position Switch-Drive Without Drive Ratio |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P314E Bmw Isetta 600 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Bmw car models :
|
The listed Bmw models will give information about P314E DTC.
|
