U0770 DTC For Ford Kuga 2
Ford Kuga 2 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Ford Kuga 2 engine control system detects a problem, the computer stores the diagnostic trouble
code U0770 in its memory.
To figure out what is wrong with your vehicle you must first extract the U0770 DTC For Ford Kuga 2.
To solve U0770 Ford Kuga 2 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
U0770 Ford Kuga 2 DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 0 |
SAE - Generic |
| 7 |
Ignition System Or Misfire |
| 7 |
Exhaust Gas Recirculation System Valve 1 |
| 0 |
Transmission Engaged At High Throttle Angle |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U0770 Ford Kuga 2 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Ford car models :
|
The listed Ford models will give information about U0770 DTC.
|
