U1105 DTC For Mercedes Cl 600
Mercedes Cl 600 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Mercedes Cl 600 engine control system detects a problem, the computer stores the diagnostic trouble
code U1105 in its memory.
To figure out what is wrong with your vehicle you must first extract the U1105 DTC For Mercedes Cl 600.
To solve U1105 Mercedes Cl 600 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
U1105 Mercedes Cl 600 DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 1 |
MFG - Manufacturer Specific |
| 1 |
Fuel And Air Metering |
| 0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
| 5 |
Cruise Inhibit Control Circuit |
When you turn on the ignition, the Service Engine Soon or Check Engine U1105 Mercedes Cl 600 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If U1105 DTC For Mercedes Cl 600 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the U1105!
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about U1105 DTC.
|
