U110D DTC For Mercedes Sprinter
Mercedes Sprinter Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Mercedes Sprinter engine control system detects a problem, the computer stores the diagnostic trouble
code U110D in its memory.
To figure out what is wrong with your vehicle you must first extract the U110D DTC For Mercedes Sprinter.
On 1999 and later U110D Mercedes Sprinter engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
U110D Mercedes Sprinter DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 1 |
MFG - Manufacturer Specific |
| 1 |
Fuel And Air Metering |
| 0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
| D |
TFP Valve Position Switch-Drive Without Drive Ratio |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U110D Mercedes Sprinter code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about U110D DTC.
|
