U3392 DTC For Dodge Copperhead
Dodge Copperhead Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Dodge Copperhead engine control system detects a problem, the computer stores the diagnostic trouble
code U3392 in its memory.
To figure out what is wrong with your vehicle you must first extract the U3392 DTC For Dodge Copperhead.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check U3392 Dodge Copperhead that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
U3392 Dodge Copperhead DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 3 |
SAE - Generic |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 9 |
TP Sensor Learn Not Complete |
| 2 |
Kick-Down Switch Failed Short |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U3392 Dodge Copperhead code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Dodge car models :
|
The listed Dodge models will give information about U3392 DTC.
|
