B2946 DTC For Mitsubishi Lancer Evo 10
Mitsubishi Lancer Evo 10 Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | Opposed Cylinder Engine |
Engine Air Intake Process : | Supercharged Engine |
Your Mitsubishi Lancer Evo 10 engine control system detects a problem, the computer stores the diagnostic trouble
code B2946 in its memory.
To figure out what is wrong with your vehicle you must first extract the B2946 DTC For Mitsubishi Lancer Evo 10.
A good ground connection is also extremely important. B2946 Mitsubishi Lancer Evo 10 engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
B2946 Mitsubishi Lancer Evo 10 DTC Meaning
B |
Body Code - Problem is antilock brake system, electronic suspension and steering systems. |
2 |
MFG - Manufacturer Specific |
9 |
Transmission |
4 |
Control Module Throttle Actuator Position Performance |
6 |
Transmission Control Module Reprogrammable Memory |
When you turn on the ignition, the Service Engine Soon or Check Engine B2946 Mitsubishi Lancer Evo 10 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If B2946 DTC For Mitsubishi Lancer Evo 10 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the B2946!
You can also check other Mitsubishi car models :
The listed Mitsubishi models will give information about B2946 DTC.
|