C0130 DTC For Subaru R1
Subaru R1 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | V-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Subaru R1 engine control system detects a problem, the computer stores the diagnostic trouble
code C0130 in its memory.
To figure out what is wrong with your vehicle you must first extract the C0130 DTC For Subaru R1.
C0130 Subaru R1 engine diagnostic code is about in terms of how often you should get your tyres rotated, it's different for every vehicle and type of tyre, but having them rotated at every oil change is a good rule of thumb. Check with the tyre manufacturer for a more specific time frame. Remember that the more often you rotate your tyres, the more evenly they'll wear, and when you have the tyres rotated, you should also get them checked for balance and alignment.
C0130 Subaru R1 DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 0 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 3 |
Low Coolant Circuit |
| 0 |
Transmission Engaged At High Throttle Angle |
The original multi-displacement system turned off opposite pairs of cylinders, allowing the engine to have three different configurations and displacements. C0130 Subaru R1 code had an elaborate diagnostics procedure, including showing engine trouble codes on the air conditionning display. However, the system was troublesome, misunderstood by customers, and a rash of unpredictable failures led to the technology being quickly retired.
You can also check other Subaru car models :
|
The listed Subaru models will give information about C0130 DTC.
|
