C0142 DTC For Rambler Ambassador
Rambler Ambassador Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Rambler Ambassador engine control system detects a problem, the computer stores the diagnostic trouble
code C0142 in its memory.
To figure out what is wrong with your vehicle you must first extract the C0142 DTC For Rambler Ambassador.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check C0142 Rambler Ambassador that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
C0142 Rambler Ambassador DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 0 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 4 |
Control Module Throttle Actuator Position Performance |
| 2 |
Kick-Down Switch Failed Short |
When you turn on the ignition, the Service Engine Soon or Check Engine C0142 Rambler Ambassador light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If C0142 DTC For Rambler Ambassador so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the C0142!
You can also check other Rambler car models :
|
The listed Rambler models will give information about C0142 DTC.
|
