C1373 DTC For Toyota Tundra
Toyota Tundra Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposite Piston Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Toyota Tundra engine control system detects a problem, the computer stores the diagnostic trouble
code C1373 in its memory.
To figure out what is wrong with your vehicle you must first extract the C1373 DTC For Toyota Tundra.
On 1999 and later C1373 Toyota Tundra engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
C1373 Toyota Tundra DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 1 |
MFG - Manufacturer Specific |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 7 |
Exhaust Gas Recirculation System Valve 1 |
| 3 |
TFP Valve Position Switch-Drive Without Drive Ratio |
If your C1373 Toyota Tundra check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system C1373 and engine control unit are in charge of monitoring a bunch of different C1373 DTC For Toyota Tundra, and if they get a reading that's a little out of whack, up pops the check engine light.
You can also check other Toyota car models :
|
The listed Toyota models will give information about C1373 DTC.
|
