C2898 DTC For Mercedes S 65
Mercedes S 65 Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposite Piston Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Mercedes S 65 engine control system detects a problem, the computer stores the diagnostic trouble
code C2898 in its memory.
To figure out what is wrong with your vehicle you must first extract the C2898 DTC For Mercedes S 65.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check C2898 Mercedes S 65 that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
C2898 Mercedes S 65 DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 2 |
MFG - Manufacturer Specific |
| 8 |
Accelerator Pedal Position (APP) Sensor 1 Performance |
| 9 |
TP Sensor Learn Not Complete |
| 8 |
Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit |
If your vehicle failed a C2898 Mercedes S 65 test and the C2898 Check Engine Light is NOT on, chances are you have a problem with the OBDII system, a burned out MIL lamp, or a faulty catalytic converter. The converter is essentially an afterburner that cleans up the exhaust after it exits the engine. The OBDII system uses C2898 a ownstream oxygen sensor to monitor the efficiency of the converter, and it should detect a drop in converter efficiency if the converter has been contaminated or is failing (ignition misfiring, leaky exhaust valves, and oil burning can all damage the converter). What you want to look C2898 DTC For Mercedes S 65: Any conditions that might cause ignition misfire, an overly rich or lean fuel condition, or loss of compression.
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about C2898 DTC.
|
