C3643 DTC For Ford Ecosport 2

Ford Ecosport 2 Engine Specifications:
Engine Type :Multi-Cylinder Engine
Cylinder Type :W-Type Engine
Engine Air Intake Process :Turbocharged Engine

Your Ford Ecosport 2 engine control system detects a problem, the computer stores the diagnostic trouble code C3643 in its memory. To figure out what is wrong with your vehicle you must first extract the C3643 DTC For Ford Ecosport 2.

To solve C3643 Ford Ecosport 2 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs

C3643 Ford Ecosport 2 DTC Meaning

C Chassis Code - Problem is controller area network wiring bus and modules.
3 SAE - Generic
6 Vehicle Speed Control And Idle Control System
4 Control Module Throttle Actuator Position Performance
3 TFP Valve Position Switch-Drive Without Drive Ratio

There are currently two main types of cylinder deactivation used today, depending on the type of engine. C3643 Ford Ecosport 2 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.

C3642 DTC (Previous DTC Code) ( Next DTC Code ) C3644 DTC
You can also check other Ford car models :
The listed Ford models will give information about C3643 DTC.