P2A07 DTC For Isuzu Vx
Isuzu Vx Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Isuzu Vx engine control system detects a problem, the computer stores the diagnostic trouble
code P2A07 in its memory.
To figure out what is wrong with your vehicle you must first extract the P2A07 DTC For Isuzu Vx.
On 1999 and later P2A07 Isuzu Vx engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
P2A07 Isuzu Vx DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 2 |
MFG - Manufacturer Specific |
| A |
Transmission |
| 0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
| 7 |
Cruise Control System - Vehicle Accel Too High |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the P2A07 Isuzu Vx code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Isuzu car models :
|
The listed Isuzu models will give information about P2A07 DTC.
|
