U1011 DTC For Ford Expedition 2
Ford Expedition 2 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Ford Expedition 2 engine control system detects a problem, the computer stores the diagnostic trouble
code U1011 in its memory.
To figure out what is wrong with your vehicle you must first extract the U1011 DTC For Ford Expedition 2.
A good ground connection is also extremely important. U1011 Ford Expedition 2 engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
U1011 Ford Expedition 2 DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 1 |
MFG - Manufacturer Specific |
| 0 |
Transmission |
| 1 |
IC Circuit High Voltage |
| 1 |
PCM Stack Overrun |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. U1011 Ford Expedition 2 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Ford car models :
|
The listed Ford models will give information about U1011 DTC.
|
