U257A DTC For Rover P2
Rover P2 Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Rover P2 engine control system detects a problem, the computer stores the diagnostic trouble
code U257A in its memory.
To figure out what is wrong with your vehicle you must first extract the U257A DTC For Rover P2.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check U257A Rover P2 that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
U257A Rover P2 DTC Meaning
| U |
Network Code - Problem is climate control system, lighting, airbags, etc. |
| 2 |
MFG - Manufacturer Specific |
| 5 |
Auxiliary Emission Controls |
| 7 |
Exhaust Gas Recirculation System Valve 1 |
| A |
TFP Valve Position Switch-Drive Without Drive Ratio |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the U257A Rover P2 code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Rover car models :
|
The listed Rover models will give information about U257A DTC.
|
